Unopened brand new (opened for photography) arm lifters that can smoothly operate tone arms without lifters, such as the RMG309i and RMG212i orthophone. Can also be used on the company's old models with a rotating shaft diameter of 20 mmφand RMA types for A shells (Oikawa Tetsuji)
Accessories: original box
Brand new and unused item (opened for photography) A slide base that allows you to use an orthophone's RMG/RMA etc. arm by using it in a hole for the SME 3009 or 3012. The shaft diameter is 20mm (Oikawa Tetsuji)
Accessories: screws, tools
Crossover 180 Hz board Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: attenuation characteristics -12 dB/oct, -18 dB/oct switching compatible models F-5/F-15/F-15L
Accuphase F-5/F-15 crossover frequency 12500 Hz board. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: crossover frequency 12500 Hz attenuation characteristics 12 dB/oct・-18 dB/oct switchable
Frequency board for Accuphase channel divider F-5/F-15 The crossover is 800 Hz, which is easy to use! The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: F-5/F-15/F-15L crossover 800 Hz attenuation characteristics -12/-18 dB switching
Crossover 5000 Hz board. Compatible with the company's channel divider F-5/F-15/F-15L. The attenuation slope can be changed to -12 dB/oct and -18 dB/oct with an internal switch. The exterior is good, with a slight dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box
Main specifications: Attenuation characteristics: -12, -18 dB/OCT switching 5000 Hz
Frequency board for Accuphase channel dividers F-5, F-15, and F-15L. It is for crossovers 1200 Hz. The exterior is good with a dullness (Kobayashi Hitoshi)
Maintenance information: 2024.5.19 Operation confirmed
Accessories: original box (for CB350)
Key Specifications: Crossover 1200Hz Chandeber Board
Comes with original box! Digital needle pressure gauge for analog record players. Compatible with measurements from 0.01g to a maximum of 200g. The tray has a layout that makes it easy to place needles. The LCD screen is backlit and equipped with an auto off function. The exterior has a feeling of use such as dullness (Hiroki Aso)
Maintenance information: 2024.5.20 Operation confirmed
Accessories: none
Main specifications: AAA battery specification W93 x H17 x D115 mm dead weight 115.5 g
Comes with original box! LUXMAN's classic line selector. It is an easy-to-use and convenient model that outputs from 1 input system to 4 systems, and conversely, outputs from 4 input systems to 1 system. Fairly good condition. Serial 2509-1G2 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual, original box
Main specifications: 1 system, 4 systems input/output W160 x H65 x D95 mm, 530 g
Pioneer ceramic straight arms. This is a genuine arm for the company's record player, and is also compatible with PL-70L2 and P3a (Satoshi Yonejima)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: straight arm pipe compatible player PL-7L PL-70L2 P3a, etc.
Includes optional weight SD-33B (7,000 yen)! Stabilizer with stroboscope. The sound definitely tightens up when used. The exterior has a feeling of use such as dullness and small scratches (Hiroki Aso)
Accessories: none
Main specifications: brass diameter 80 mm x thickness 43 mm 730 g + 730 g = 1,460 g
Exclusive stand for the DS-77HR sold separately. Of course, it is also recommended for other medium speakers. The exterior has creases, floats, scratches, etc. (Tamura Eiji)
Accessories: No accessories
Main specifications: W410 x H264 x D330 mm weight 10 kg
YAMAHA speaker stand The compact stand is made to feel stiff, and you can expect tight sound quality. It can be used for small speakers such as the NS-10M and medium speakers. There are line marks, threads, and tape marks on the exterior (Tamura Eiji)
Accessories: No accessories
Main specifications: W270 x H494 x D350 mm top plate part W190 W x D175 mm 7 kg/unit
3P inlet plug Pure copper with high conductivity is used for the blade to ensure rigidity. The contacts are models that use rhodium plating treatment and α-process treatment (ultra-low temperature treatment & special electromagnetic field treatment). (TAMURA Eiji)
Accessories: case
Metal speaker stand from unknown manufacturer. It seems that there is a sand-based damping material inside. There is a screw hole on the bottom to attach a spike (Murakoshi Yoichi)
Accessories: none
Main specifications: top surface 220 x 240 mm W280 x H642 x D341 mm 14.8 kg
The price has been drastically reduced. 2023/12/28 sales price 4,800 yen. *Set of 3 Ebony insulators Aiming for an optimal shape to balance sound quality, it is precisely machined with NC for woodworking (Mizushima Itsuro)
Accessories: none
Main specifications: size diameter 25 mm x H15 mm maximum load 30 g/1 piece
The price has been reduced. 2024/2/26 sales price 1,200 yen. Unspecified set of 3 wood blocks A wooden block that feels like Yamamoto Sound Crafts's QB-4 is one size smaller. There is a feeling of use (Takasaki Atsushi)
Main specifications: size approx. W40 x D40 x H40 mm approx. 70 g (actual measurement)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand single point loads at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
GT SONIC's compact ultrasonic cleaner for commercial use. It's not for audio only, but it seems that it can be used for quite a variety of purposes. I think the size is good too. If you've been looking for one, take this opportunity. You can see the exterior, dullness, and feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 Operation confirmed
Accessories: power cord, original box
Main specifications: ultrasonic power consumption 150 W power supply AC 100-120 V 50/60 Hz ultrasonic frequency 40,000 Hz cleaning tank size: W155 x H150 x D300 mm body size: 180 x 310 x 330 mm 5.9 kg
※Since the terminal is broken in one place, it is inexpensive. Classic speaker selector. It is a convenient unit for outputting from 1 input system to 4 systems, or conversely, outputting 4 input systems to 1 system. There are scratches and dullness on the exterior. Serial 121-1 G1 (Satoshi Yonejima)
Maintenance information: 2024.5.18 continuity confirmed
Accessories: instruction manual
Main specifications: 1 system/4 system input/output W160 x H65 x D95 mm 530 g
※ It is inexpensive because it is in poor condition such as dirt and felt peeling. Set of 3 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images. The exterior has rust and dirt due to aging, and deterioration in the bottom felt (Satoshi Yonejima)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
A compact, high CP, and easy headphone amplifier. The sound is bright and has good visibility. A well-balanced model that works well with everything from pop to rock. Serial 32741 (Fujisawa Yukishi)
Maintenance information: 2024.5.18 Operation confirmed
Accessories: instruction manual, AC adapter
Main specifications: output 330 mw/30 ohm, 60 mw/300 ohm headphone amplifier connection, 30 ohm gain, 11 dB S/N ratio, 87 dB frequency characteristics, 30 to 20 kHz, input/output RCA, 1 system each, W103 x D127 x H38 mm, 1.40 kg
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness (Tomoho Asaine)
Accessories: none
Set of 4 banana plugs. High sound quality solderless (no solder). This is a banana plug with a screw fastening system. This plug is orthodox and easy to use. The exterior has a feeling of use such as dullness or oxidation. (ASAINE Tomonori)
Accessories: none
A semi-permanent contact conductive agent that made krypton a major. Carbon+Diamond Ultrafine Particles It's about half a bottle in it (Murakoshi Yoichi)
Accessories: package
Quadra Spire Center Speaker Stand This stand allows you to adjust the angle according to the listening position. As for the exterior, felt is attached to the bottom (Tamura Eiji)
Accessories: No accessories
Main specifications: W375 x H111 x D290 mm
XLR cable 3ch line selector High quality parts are used for the changeover switch, connector, and internal wiring, and the original sound quality is conveyed as it is. You can select up to 3 amplifiers (pre-amplifier or pre-main amplifier) for 1 source device. Also, you can select up to 3 source devices to be switched for 1 amplifier (preamp or premain amplifier). You can see a feeling of use, such as appearance, dullness, abrasions, etc. (Kobayashi Hitoshi)
Maintenance information: 2024.5.14 continuity confirmed
Accessories: none
Main specifications: 1 input/3 output systems GND common to all input/output W250 x H64 x D117 mm 2.3 kg
1 set of 4 Y rugs It is a screw-tightened metal Y lug terminal that can be easily fixed and is compatible with various core wire diameters and terminal diameters. There is dullness (Mizushima Itsuro)
Accessories: none
Main specifications: core wire strand diameter 1.5 to 4.0 mm, terminal diameter up to 6.0 mm
NAGAOKA stylus cleaner. This is a standard cartridge cleaner product and an easy to use and convenient item. It's a volatile and safe cleaner. About 80% of the remaining amount is left (Yamato Yuki)
The price has been reduced! 2023/5/15 sales price 19,800 yen A new-concept connected tap equipped with a surge absorber (lightning protection) and noise filter in one package. It has contributed greatly to further improvements in S/N and sharp sound quality that is transparent yet makes you feel dynamic. There are no noticeable scratches on the exterior. Serial 38600KK042 (Yonejima Satoshi)
Maintenance information: 2024.5.15 continuity confirmed
Accessories: No accessories
Main specifications: W56 x H35 x D233 mm (including connected outlets) 620 g
This is a set of 4 AET y rugs. Surface treatment is performed using plating with a content of 99% or more of precious metals (Murakoshi Yoichi)
Accessories: none
Main specifications: width 12 mm, length 23.5 mm
A super high end power strip by Acoustic Revive, which is Hi-Fi's first appearance! Adopts a patented stainless steel spring and an electrode structure using pure copper. The conductivity seems to have improved dramatically, and I have the impression that the sound quality has become smoother. The appearance is good with little feeling of use (Kobayashi Hitoshi)
Maintenance information: 2024.5.12 continuity confirmed
Accessories: original box
Main specifications: W88 x H70 x D265 mm 2.5 kg
A passive attenuator that uses DALE NS-2B, a non-inductive wire winding resistor. The input impedance is 10 kΩ, and the maximum attenuation is possible to approximately -58 dB. The 23-contact VOL can be attenuated at approximately -2.5 dB. It has a careful finish that focuses on solid aluminum knobs, internal wiring, and even each part. (FUJISAWA KOSHI)
Maintenance information: 2024.5.17 Operation confirmed
Accessories: No accessories
Main specifications: W112 x H68 x D155 mm (including knob terminals)
A speaker stand with the same texture as the company's NS-1000M. The angle of the midplate can be adjusted to 4 positions according to the low frequency characteristics of the room and speakers. It is ideal for medium speakers such as the NS-1000M. The exterior has scratches and dullness. (FUJISAWA KOSHI)
Accessories: No accessories
Main specifications: W370 x H250 x D290 mm 6.5 kg
Granite speaker stand by Ishizo Unkei. It has been mirrored and has a careful finish. It contributes to damping the vibration and tightening of the sound of small speakers (Ryo Mizusaki)
Accessories: none
Main specifications: top plate W160 x D220 mm bottom surface W220 x D270 mm height 605 mm weight 17.3 kg
※The spikes are out of stock, so it's cheap. A perfectly sized round top plate is used for B&W's “805 Series”. This speaker stand is made of lightweight magnesium alloy with a high vibration absorption rate (Shota Sasaki)
Accessories: none
Main specifications: top plate W226 x D304 mm bottom plate W238 x D317 mm height 600 mm weight 14 kg
A stabilized power supply that improves sound quality by supplying a stable power source with very little noise to USB devices in place of PC bus power. It plays a part in upgrading the USB data you have (Murakoshi Yoichi)
Maintenance information: 2024.5.11 sound output confirmed
Accessories: AC adapter
Main specifications: AC100V output voltage DC5V maximum current 500mA input terminal Neutrik USB B type connector output terminal high quality USB cable approx. 10 cm+B type plug W97 x H31 x D39 mm
A ham eraser that can input 1000 VA with 2 inputs. It is mainly effective with front-end devices such as CD players and amplifiers. Delicate and highly transparent sound quality can be obtained due to improved SNR, and clear, high-definition images can be obtained in video systems. PSE standard product. There is dirt on the exterior (Yonejima Satoshi)
Maintenance information: 2024.5.15 Operation confirmed
Accessories: No accessories
Main specifications: 2 input outlets W130 x H94 x D267 mm (without protrusions) approx. 2.0 kg
Solid brass machined short pin for RCA terminals. Attach it to the input terminal of an audio device to stabilize the input circuit. The exterior has dullness and light threads (Satoshi Yonejima)
Accessories: original box
Main specifications: set of 8, solid machined brass, 24k gold plated, length 28.5 x diameter 12 mm, weight 12.5 g/piece
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
This is a set of 4 small spikes. It has good cost performance, high rigidity that can withstand a single point load at point contact, and achieves stable point contact. There is a feeling of use on the exterior such as dullness and small scratches (Tamai Jun)
Accessories: none
Main specifications: diameter 20 mm x H9.9 mm 15.8 g (1 piece)
Set of 4 classic TAOC basses. Made of high-carbon cast iron with excellent vibration handling capabilities. It can be used for a wide range of speakers from large to medium, and accurately reproduces sound images (Oikawa Tetsuji)
Accessories: none
Main specifications: W100×H200×D300mm 9.2 kg
The disposal price has been reduced! (Member price not applicable) 2024/4/12 sales price 70,000 yen B&W 805D series speaker stand. Equipped with a spike insulator “T-PROP”. It is a speaker stand with a completely new concept developed with the theme of eliminating speaker stress as much as possible by absorbing and releasing it in a natural way without putting a load on the diamond formation structure. The exterior has scratches, paint peeling, and bumps. (FUJISAWA KOSHI)
Accessories: insulator T-PROP, screws
Main specifications: top plate W227 x D306 mm B&W 805 Diamond, D3 specially designed bottom plate W280 x D360 mm height 500 mm approx. 15 kg
TAOC rack underspacer and upper spacer set. If you have a spare or lost one, don't miss it. There is a feeling of use on the exterior such as dullness and small scratches (Asaine Tomoho)
Accessories: none
Key Specifications: 6 upper spacers, 2 underspacers, 3 cast iron knurled nuts
A power supply with approximately 2.5 times the capacity of the power supply built into the GT player. In addition to improving rotation stability, the phono motor's bidirectional servos are used as electronic brakes, and heavyweight turntables stop quickly. There are dents on the exterior, dents on the top plate, rust on the output terminals, dullness throughout, and a feeling of use (Murakoshi Yoichi)
Maintenance information: 2024.5.11 Operation confirmed
Accessories: none
Main specifications: Applicable models GT-2000/L/X W135 x H93 x D365 mm, weight 5 kg
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Tokyo Soundproof Insulator Set of 4 The sound quality is tuned in a stiff and clear direction. Please also use it as an anti-vibration measure. There is a feeling of use on the exterior due to dullness, abrasions, etc. (Jun Tamai)
Accessories: original box
Main specifications: diameter 40φ×24φ×height 11mm (for 4 mm diameter holes) weight 8g non-repulsive rubber (honeycomb)
Special stand for SX-311GY Chic grey finish It is a model that can be used with various medium speakers. Dullness, small scratches, and abrasions due to aging are conspicuous on the exterior. (YONEJIMA Satoshi)
Accessories: No accessories
Main specifications: W330 x H440 x D294 mm top plate part W267 x D245 mm 5.3 kg